VLS3P030R2 | Square D | Enclosures, Panels & Fabrication

These TeSys VLS disconnect switches are for integration into control systems in applications like material handling, HVAC, pumping, solar energy, mining and many more. This family of disconnect switches has switches ranging from 16 A to 125 A. The 16 A, 25 A, 32 A, 40 A and 63 A disconnect switches are UL508 motor disconnect switches rated. The 30 A, 63 A, 80 A, 100 A and 125 A disconnect switches are UL98 non fusible disconnect switch rated. This 30 A disconnect switch has 3 normally open poles and mounts on DIN rail. Per UL and CSA this this disconnect switch has a 2 HP rating at 120 VAC and a 5 HP at 240 VAC single phase. Per UL and CSA this disconnect switch has a 10 HP rating at 200 to 208 VAC and 240 VAC, a 20 HP rating at 480 VAC and a 30 HP rating at 600 VAC three phase. Per UL508 A this this disconnect switch has up to a 50 kA at 600 V short circuit current rating (SCCR) with a 60 A Type J fuse maximum. Per IEC requirements, this disconnect switch has a 15 kW rating at 400 V, a 22 kW rating at 500 V and a 22 kW rating at 690 V three phase. The screw clamps will accept from 12 AWG to 1 AWG wire. The screw clamp terminals will also accept 4 Millimeter to 70 Millimeter wire. This disconnect switch is 3.94 Inch tall, 2.75 Inch wide and 2.95 Inch deep. The switch weighs 0.80 lbs. There are many accessories available this TeSys VLS disconnect switch. This TeSys VLS disconnect switch is UL Listed per UL98, CSA certified per CSA 22.2 and meets IEC 60947-3 requirements.