{"title":"Strap On \/ Pipe","description":"\u003cp\u003eGet precise temperature measurement without disrupting flow - shop the selection of strap on pipe sensors from Building Controls \u0026amp; Solutions, perfect for retrofitting.\u003c\/p\u003e","products":[{"product_id":"75f-3xsec28xx","title":"3X-SE-C28X-X","description":"","brand":"75F","offers":[{"title":"Default Title","offer_id":47988871823600,"sku":"75F-3XSEC28XX","price":43.85,"currency_code":"USD","in_stock":true}]},{"product_id":"75f-3xsec32xx","title":"3X-SE-C32X-X","description":"","brand":"75F","offers":[{"title":"Default Title","offer_id":47988871987440,"sku":"75F-3XSEC32XX","price":41.45,"currency_code":"USD","in_stock":true}]},{"product_id":"75f-3xsec70xx","title":"3X-SE-C70X-X","description":"","brand":"75F","offers":[{"title":"Default Title","offer_id":47988872347888,"sku":"75F-3XSEC70XX","price":73.86,"currency_code":"USD","in_stock":true}]},{"product_id":"75f-3xsec7xx","title":"3X-SE-C7X-X","description":"","brand":"75F","offers":[{"title":"Default Title","offer_id":47988872478960,"sku":"75F-3XSEC7XX","price":67.13,"currency_code":"USD","in_stock":true}]},{"product_id":"aci-a1002ws104x","title":"A\/100-2W-S10-4X","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991388995824,"sku":"ACI-A1002WS104X","price":100.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/rs_a-100-2w-s10-4x.png?v=1758690719"},{"product_id":"aci-a1002ws4x","title":"A\/100-2W-S-4X","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991389028592,"sku":"ACI-A1002WS4X","price":83.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-2w-s-4x.png?v=1758690726"},{"product_id":"aci-a1002wsgd","title":"A\/100-2W-S-GD","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991389094128,"sku":"ACI-A1002WSGD","price":50.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-2w-s-gd.png?v=1758690719"},{"product_id":"aci-a1002wsgdnist","title":"A\/100-2W-S-GD-NIST","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991389126896,"sku":"ACI-A1002WSGDNIST","price":117.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-2w-s-gd-nist.png?v=1758690721"},{"product_id":"aci-a1002wspb","title":"A\/100-2W-S-PB","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991389192432,"sku":"ACI-A1002WSPB","price":50.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-2w-s-pb.png?v=1758690725"},{"product_id":"aci-a1003wpm10cl2p","title":"A\/100-3W-PM-10'CL2P","description":"The ACI Thermistor Pipe Mount Series features a 1.1 Inch long Brass probe with a small curvature on the bottom that is designed to increase the surface area and improve the thermal conductivity between the pipe and the sensor. Each sensor has two, 24 inch 22 AWG Etched Teflon colored lead wires to differentiate the many different sensor types. All sensors in this series are manufactured using ACI?ó?é¼?äós proven double encapsulation process to eliminate the effects of moisture upon the sensors and to improve the thermal response times using our high quality, thermally conductive epoxy. The Pipe Mount sensor should be used to monitor pipe or coil sizes from 1\/2?ó?é¼?¥ to 1?ó?é¼?¥ in diameter. A 7.5?ó?é¼?¥ nylon wire tie is supplied for fastening the sensor to the top of the pipe. For best accuracy and increased thermal conduction between the pipe and sensor, ACI recommends to clean the pipe and to apply thermal grease between the sensor and pipe before securely fastening to the pipe and insulating the sensor from any effects of the ambient air. An optional Plenum rated cable, Zip wire or NIST Certificate are available as referenced in the ordering grid on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991392895216,"sku":"ACI-A1003WPM10CL2P","price":81.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-3w-pm-10cl2p.png?v=1758690730"},{"product_id":"aci-a1003wpm20cl2p","title":"A\/100-3W-PM-20'CL2P","description":"The ACI Thermistor Pipe Mount Series features a 1.1 Inch long Brass probe with a small curvature on the bottom that is designed to increase the surface area and improve the thermal conductivity between the pipe and the sensor. Each sensor has two, 24 inch 22 AWG Etched Teflon colored lead wires to differentiate the many different sensor types. All sensors in this series are manufactured using ACI?ó?é¼?äós proven double encapsulation process to eliminate the effects of moisture upon the sensors and to improve the thermal response times using our high quality, thermally conductive epoxy. The Pipe Mount sensor should be used to monitor pipe or coil sizes from 1\/2?ó?é¼?¥ to 1?ó?é¼?¥ in diameter. A 7.5?ó?é¼?¥ nylon wire tie is supplied for fastening the sensor to the top of the pipe. For best accuracy and increased thermal conduction between the pipe and sensor, ACI recommends to clean the pipe and to apply thermal grease between the sensor and pipe before securely fastening to the pipe and insulating the sensor from any effects of the ambient air. An optional Plenum rated cable, Zip wire or NIST Certificate are available as referenced in the ordering grid on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991392927984,"sku":"ACI-A1003WPM20CL2P","price":105.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/rs_a-100-3w-pm-20cl2p.jpg?v=1758690727"},{"product_id":"aci-a1003ws10pb","title":"A\/100-3W-S10-PB","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991393648880,"sku":"ACI-A1003WS10PB","price":68.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-3w-s10-gd.png?v=1758690732"},{"product_id":"aci-a1003ws4x","title":"A\/100-3W-S-4X","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991393681648,"sku":"ACI-A1003WS4X","price":83.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-3w-s10-pb.png?v=1758690735"},{"product_id":"aci-a1003wsbs","title":"A\/100-3W-SBS","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991393714416,"sku":"ACI-A1003WSBS","price":85.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-3w-s-4x.png?v=1758690740"},{"product_id":"aci-a1003wsp","title":"A\/100-3W-SP","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991393779952,"sku":"ACI-A1003WSP","price":49.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-3w-s-gd.png?v=1758690744"},{"product_id":"aci-a100ksa244x","title":"A\/100KS-A-24'-4X","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991393878256,"sku":"ACI-A100KSA244X","price":296.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-3w-s-pb.png?v=1758690741"},{"product_id":"aci-a100kss4x","title":"A\/100KS-S-4X","description":"The ACI Thermistor Strap-On Series features a 1.5 Inch square copper plate with the sensor encapsulated to the back side of the plate to improve the thermal conductivity between the pipe and the sensor when an Immersion style sensor can't be inserted into the pipe. Each sensor has two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI's proven double encapsulation process to eliminate the effects of moisture upon the sensors as well as to improve the thermal response times using our high quality, thermally conductive epoxy. The Strap-On Series sensors can be used to monitor pipe sizes from 1-1\/4 to 10 inch in diameter. For best accuracy and increased thermal conduction between the pipe and the sensor, ACI recommends to clean the pipe before applying thermal grease as well as to insulate the sensor from the effects of the ambient air. Optional weather proof enclosure and NIST certificates are available upon request.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991396794608,"sku":"ACI-A100KSS4X","price":73.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100ks-s-4x.png?v=1758690725"},{"product_id":"aci-a100kssgd","title":"A\/100KS-S-GD","description":"The ACI Thermistor Strap-On Series features a 1.5 Inch square copper plate with the sensor encapsulated to the back side of the plate to improve the thermal conductivity between the pipe and the sensor when an Immersion style sensor can't be inserted into the pipe. Each sensor has two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI's proven double encapsulation process to eliminate the effects of moisture upon the sensors as well as to improve the thermal response times using our high quality, thermally conductive epoxy. The Strap-On Series sensors can be used to monitor pipe sizes from 1-1\/4 to 10 inch in diameter. For best accuracy and increased thermal conduction between the pipe and the sensor, ACI recommends to clean the pipe before applying thermal grease as well as to insulate the sensor from the effects of the ambient air. Optional weather proof enclosure and NIST certificates are available upon request.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991396860144,"sku":"ACI-A100KSSGD","price":40.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100ks-s-gd.png?v=1758690726"},{"product_id":"aci-a100ksspb","title":"A\/100KS-S-PB","description":"The ACI Thermistor Strap-On Series features a 1.5 Inch square copper plate with the sensor encapsulated to the back side of the plate to improve the thermal conductivity between the pipe and the sensor when an Immersion style sensor can't be inserted into the pipe. Each sensor has two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI's proven double encapsulation process to eliminate the effects of moisture upon the sensors as well as to improve the thermal response times using our high quality, thermally conductive epoxy. The Strap-On Series sensors can be used to monitor pipe sizes from 1-1\/4 to 10 inch in diameter. For best accuracy and increased thermal conduction between the pipe and the sensor, ACI recommends to clean the pipe before applying thermal grease as well as to insulate the sensor from the effects of the ambient air. Optional weather proof enclosure and NIST certificates are available upon request.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991396925680,"sku":"ACI-A100KSSPB","price":40.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100ks-s-pb.png?v=1758690724"},{"product_id":"aci-a10ke1pm6cl2p","title":"A\/10K-E1-PM-6'CL2P","description":"\u003cp\u003eThe ACI Thermistor Pipe Mount Series features a 1.1 Inch long Brass probe with a small curvature on the bottom that is designed to increase the surface area and improve the thermal conductivity between the pipe and the sensor. Each sensor has two, 24 inch 22 AWG Etched Teflon colored lead wires to differentiate the many different sensor types. All sensors in this series are manufactured using ACI?ó?é¼?äós proven double encapsulation process to eliminate the effects of moisture upon the sensors and to improve the thermal response times using our high quality, thermally conductive epoxy. The Pipe Mount sensor should be used to monitor pipe or coil sizes from 1\/2?ó?é¼?¥ to 1?ó?é¼?¥ in diameter. A 7.5?ó?é¼?¥ nylon wire tie is supplied for fastening the sensor to the top of the pipe. For best accuracy and increased thermal conduction between the pipe and sensor, ACI recommends to clean the pipe and to apply thermal grease between the sensor and pipe before securely fastening to the pipe and insulating the sensor from any effects of the ambient air. An optional Plenum rated cable, Zip wire or NIST Certificate are available as referenced in the ordering grid on the back of the Product Data Sheet.\u003c\/p\u003e","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991399743728,"sku":"ACI-A10KE1PM6CL2P","price":40.5,"currency_code":"USD","in_stock":true}]},{"product_id":"aci-a10ke1s4x","title":"A\/10K-E1-S-4X","description":"The ACI Thermistor Strap-On Series features a 1.5 Inch square copper plate with the sensor encapsulated to the back side of the plate to improve the thermal conductivity between the pipe and the sensor when an Immersion style sensor can't be inserted into the pipe. Each sensor has two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI's proven double encapsulation process to eliminate the effects of moisture upon the sensors as well as to improve the thermal response times using our high quality, thermally conductive epoxy. The Strap-On Series sensors can be used to monitor pipe sizes from 1-1\/4 to 10 inch in diameter. For best accuracy and increased thermal conduction between the pipe and the sensor, ACI recommends to clean the pipe before applying thermal grease as well as to insulate the sensor from the effects of the ambient air. Optional weather proof enclosure and NIST certificates are available upon request.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991400464624,"sku":"ACI-A10KE1S4X","price":74.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/rs_a-10k-e1-s-4x.png?v=1758690728"},{"product_id":"aci-a10ke1sgd","title":"A\/10K-E1-S-GD","description":"The ACI Thermistor Strap-On Series features a 1.5 Inch square copper plate with the sensor encapsulated to the back side of the plate to improve the thermal conductivity between the pipe and the sensor when an Immersion style sensor can't be inserted into the pipe. Each sensor has two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI's proven double encapsulation process to eliminate the effects of moisture upon the sensors as well as to improve the thermal response times using our high quality, thermally conductive epoxy. The Strap-On Series sensors can be used to monitor pipe sizes from 1-1\/4 to 10 inch in diameter. For best accuracy and increased thermal conduction between the pipe and the sensor, ACI recommends to clean the pipe before applying thermal grease as well as to insulate the sensor from the effects of the ambient air. Optional weather proof enclosure and NIST certificates are available upon request.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991400530160,"sku":"ACI-A10KE1SGD","price":47.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a10k-e1-s-gd.png?v=1758690730"},{"product_id":"aci-a10ke1spb","title":"A\/10K-E1-S-PB","description":"The ACI Thermistor Strap-On Series features a 1.5 Inch square copper plate with the sensor encapsulated to the back side of the plate to improve the thermal conductivity between the pipe and the sensor when an Immersion style sensor can't be inserted into the pipe. Each sensor has two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI's proven double encapsulation process to eliminate the effects of moisture upon the sensors as well as to improve the thermal response times using our high quality, thermally conductive epoxy. The Strap-On Series sensors can be used to monitor pipe sizes from 1-1\/4 to 10 inch in diameter. For best accuracy and increased thermal conduction between the pipe and the sensor, ACI recommends to clean the pipe before applying thermal grease as well as to insulate the sensor from the effects of the ambient air. Optional weather proof enclosure and NIST certificates are available upon request.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991400595696,"sku":"ACI-A10KE1SPB","price":40.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/rs_a-10k-e1-s-pb.png?v=1758690729"},{"product_id":"aci-a10kspm10cl2p","title":"A\/10KS-PM-10'CL2P","description":"\u003cp\u003eThe ACI Thermistor Pipe Mount Series features a 1.1 Inch long Brass probe with a small curvature on the bottom that is designed to increase the surface area and improve the thermal conductivity between the pipe and the sensor. Each sensor has two, 24 inch 22 AWG Etched Teflon colored lead wires to differentiate the many different sensor types. All sensors in this series are manufactured using ACI?ó?é¼?äós proven double encapsulation process to eliminate the effects of moisture upon the sensors and to improve the thermal response times using our high quality, thermally conductive epoxy. The Pipe Mount sensor should be used to monitor pipe or coil sizes from 1\/2?ó?é¼?¥ to 1?ó?é¼?¥ in diameter. A 7.5?ó?é¼?¥ nylon wire tie is supplied for fastening the sensor to the top of the pipe. For best accuracy and increased thermal conduction between the pipe and sensor, ACI recommends to clean the pipe and to apply thermal grease between the sensor and pipe before securely fastening to the pipe and insulating the sensor from any effects of the ambient air. An optional Plenum rated cable, Zip wire or NIST Certificate are available as referenced in the ordering grid on the back of the Product Data Sheet.\u003c\/p\u003e","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991414227184,"sku":"ACI-A10KSPM10CL2P","price":50.93,"currency_code":"USD","in_stock":true}]},{"product_id":"aci-a10kss10pb","title":"A\/10KS-S10-PB","description":"The ACI Thermistor Strap-On Series features a 1.5 Inch square copper plate with the sensor encapsulated to the back side of the plate to improve the thermal conductivity between the pipe and the sensor when an Immersion style sensor can't be inserted into the pipe. Each sensor has two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI's proven double encapsulation process to eliminate the effects of moisture upon the sensors as well as to improve the thermal response times using our high quality, thermally conductive epoxy. The Strap-On Series sensors can be used to monitor pipe sizes from 1-1\/4 to 10 inch in diameter. For best accuracy and increased thermal conduction between the pipe and the sensor, ACI recommends to clean the pipe before applying thermal grease as well as to insulate the sensor from the effects of the ambient air. Optional weather proof enclosure and NIST certificates are available upon request.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991415013616,"sku":"ACI-A10KSS10PB","price":58.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a10ks-s10-pb.png?v=1758690748"},{"product_id":"aci-a10kss4x","title":"A\/10KS-S-4X","description":"The ACI Thermistor Strap-On Series features a 1.5 Inch square copper plate with the sensor encapsulated to the back side of the plate to improve the thermal conductivity between the pipe and the sensor when an Immersion style sensor can't be inserted into the pipe. Each sensor has two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI's proven double encapsulation process to eliminate the effects of moisture upon the sensors as well as to improve the thermal response times using our high quality, thermally conductive epoxy. The Strap-On Series sensors can be used to monitor pipe sizes from 1-1\/4 to 10 inch in diameter. For best accuracy and increased thermal conduction between the pipe and the sensor, ACI recommends to clean the pipe before applying thermal grease as well as to insulate the sensor from the effects of the ambient air. Optional weather proof enclosure and NIST certificates are available upon request.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991415046384,"sku":"ACI-A10KSS4X","price":76.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a10ks-s-4x.png?v=1758690746"},{"product_id":"aci-a10kssgd","title":"A\/10KS-S-GD","description":"The ACI Thermistor Strap-On Series features a 1.5 Inch square copper plate with the sensor encapsulated to the back side of the plate to improve the thermal conductivity between the pipe and the sensor when an Immersion style sensor can't be inserted into the pipe. Each sensor has two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI's proven double encapsulation process to eliminate the effects of moisture upon the sensors as well as to improve the thermal response times using our high quality, thermally conductive epoxy. The Strap-On Series sensors can be used to monitor pipe sizes from 1-1\/4 to 10 inch in diameter. For best accuracy and increased thermal conduction between the pipe and the sensor, ACI recommends to clean the pipe before applying thermal grease as well as to insulate the sensor from the effects of the ambient air. Optional weather proof enclosure and NIST certificates are available upon request.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991415111920,"sku":"ACI-A10KSSGD","price":47.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a10ks-s-gd.png?v=1758690748"},{"product_id":"aci-a10ksspb","title":"A\/10KS-S-PB","description":"The ACI Thermistor Strap-On Series features a 1.5 Inch square copper plate with the sensor encapsulated to the back side of the plate to improve the thermal conductivity between the pipe and the sensor when an Immersion style sensor can't be inserted into the pipe. Each sensor has two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI's proven double encapsulation process to eliminate the effects of moisture upon the sensors as well as to improve the thermal response times using our high quality, thermally conductive epoxy. The Strap-On Series sensors can be used to monitor pipe sizes from 1-1\/4 to 10 inch in diameter. For best accuracy and increased thermal conduction between the pipe and the sensor, ACI recommends to clean the pipe before applying thermal grease as well as to insulate the sensor from the effects of the ambient air. Optional weather proof enclosure and NIST certificates are available upon request.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991415177456,"sku":"ACI-A10KSSPB","price":47.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a10ks-s-pb.png?v=1758690748"},{"product_id":"aci-a18kpm20cl2p","title":"A\/1.8K-PM-20'CL2P","description":"The ACI Thermistor Pipe Mount Series features a 1.1 Inch long Brass probe with a small curvature on the bottom that is designed to increase the surface area and improve the thermal conductivity between the pipe and the sensor. Each sensor has two, 24 inch 22 AWG Etched Teflon colored lead wires to differentiate the many different sensor types. All sensors in this series are manufactured using ACI?ó?é¼?äós proven double encapsulation process to eliminate the effects of moisture upon the sensors and to improve the thermal response times using our high quality, thermally conductive epoxy. The Pipe Mount sensor should be used to monitor pipe or coil sizes from 1\/2?ó?é¼?¥ to 1?ó?é¼?¥ in diameter. A 7.5?ó?é¼?¥ nylon wire tie is supplied for fastening the sensor to the top of the pipe. For best accuracy and increased thermal conduction between the pipe and sensor, ACI recommends to clean the pipe and to apply thermal grease between the sensor and pipe before securely fastening to the pipe and insulating the sensor from any effects of the ambient air. An optional Plenum rated cable, Zip wire or NIST Certificate are available as referenced in the ordering grid on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991418093808,"sku":"ACI-A18KPM20CL2P","price":62.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a18k-pm-20cl2p.png?v=1758690764"},{"product_id":"aci-a18kpm20znist","title":"A\/1.8K-PM-20'Z-NIST","description":"The ACI Thermistor Pipe Mount Series features a 1.1 Inch long Brass probe with a small curvature on the bottom that is designed to increase the surface area and improve the thermal conductivity between the pipe and the sensor. Each sensor has two, 24 inch 22 AWG Etched Teflon colored lead wires to differentiate the many different sensor types. All sensors in this series are manufactured using ACI?ó?é¼?äós proven double encapsulation process to eliminate the effects of moisture upon the sensors and to improve the thermal response times using our high quality, thermally conductive epoxy. The Pipe Mount sensor should be used to monitor pipe or coil sizes from 1\/2?ó?é¼?¥ to 1?ó?é¼?¥ in diameter. A 7.5?ó?é¼?¥ nylon wire tie is supplied for fastening the sensor to the top of the pipe. For best accuracy and increased thermal conduction between the pipe and sensor, ACI recommends to clean the pipe and to apply thermal grease between the sensor and pipe before securely fastening to the pipe and insulating the sensor from any effects of the ambient air. An optional Plenum rated cable, Zip wire or NIST Certificate are available as referenced in the ordering grid on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991418126576,"sku":"ACI-A18KPM20ZNIST","price":128.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a18k-pm-20z-nist.png?v=1758690761"},{"product_id":"aci-a18ks104x","title":"A\/1.8K-S10-4X","description":"\u003cp\u003eThe ACI Thermistor Strap-On Series features a 1.5 Inch square copper plate with the sensor encapsulated to the back side of the plate to improve the thermal conductivity between the pipe and the sensor when an Immersion style sensor can't be inserted into the pipe. Each sensor has two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI's proven double encapsulation process to eliminate the effects of moisture upon the sensors as well as to improve the thermal response times using our high quality, thermally conductive epoxy. The Strap-On Series sensors can be used to monitor pipe sizes from 1-1\/4 to 10 inch in diameter. For best accuracy and increased thermal conduction between the pipe and the sensor, ACI recommends to clean the pipe before applying thermal grease as well as to insulate the sensor from the effects of the ambient air. Optional weather proof enclosure and NIST certificates are available upon request.\u003c\/p\u003e","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991418814704,"sku":"ACI-A18KS104X","price":90.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a1-8k-s10-4x.jpg?v=1758690758"},{"product_id":"aci-a18ks10pb","title":"A\/1.8K-S10-PB","description":"\u003cp\u003eThe ACI Thermistor Strap-On Series features a 1.5 Inch square copper plate with the sensor encapsulated to the back side of the plate to improve the thermal conductivity between the pipe and the sensor when an Immersion style sensor can't be inserted into the pipe. Each sensor has two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI's proven double encapsulation process to eliminate the effects of moisture upon the sensors as well as to improve the thermal response times using our high quality, thermally conductive epoxy. The Strap-On Series sensors can be used to monitor pipe sizes from 1-1\/4 to 10 inch in diameter. For best accuracy and increased thermal conduction between the pipe and the sensor, ACI recommends to clean the pipe before applying thermal grease as well as to insulate the sensor from the effects of the ambient air. Optional weather proof enclosure and NIST certificates are available upon request.\u003c\/p\u003e","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991418847472,"sku":"ACI-A18KS10PB","price":59.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a1-8k-s10-pb.jpg?v=1758690750"},{"product_id":"aci-a18ks4x","title":"A\/1.8K-S-4X","description":"The ACI Thermistor Strap-On Series features a 1.5 Inch square copper plate with the sensor encapsulated to the back side of the plate to improve the thermal conductivity between the pipe and the sensor when an Immersion style sensor can't be inserted into the pipe. Each sensor has two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI's proven double encapsulation process to eliminate the effects of moisture upon the sensors as well as to improve the thermal response times using our high quality, thermally conductive epoxy. The Strap-On Series sensors can be used to monitor pipe sizes from 1-1\/4 to 10 inch in diameter. For best accuracy and increased thermal conduction between the pipe and the sensor, ACI recommends to clean the pipe before applying thermal grease as well as to insulate the sensor from the effects of the ambient air. Optional weather proof enclosure and NIST certificates are available upon request.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991418880240,"sku":"ACI-A18KS4X","price":73.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a18k-s-4x.png?v=1758690755"},{"product_id":"aci-a18ksgd","title":"A\/1.8K-S-GD","description":"The ACI Thermistor Strap-On Series features a 1.5 Inch square copper plate with the sensor encapsulated to the back side of the plate to improve the thermal conductivity between the pipe and the sensor when an Immersion style sensor can't be inserted into the pipe. Each sensor has two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI's proven double encapsulation process to eliminate the effects of moisture upon the sensors as well as to improve the thermal response times using our high quality, thermally conductive epoxy. The Strap-On Series sensors can be used to monitor pipe sizes from 1-1\/4 to 10 inch in diameter. For best accuracy and increased thermal conduction between the pipe and the sensor, ACI recommends to clean the pipe before applying thermal grease as well as to insulate the sensor from the effects of the ambient air. Optional weather proof enclosure and NIST certificates are available upon request.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991418945776,"sku":"ACI-A18KSGD","price":46.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a18k-s-gd.png?v=1758690750"},{"product_id":"aci-a18kspb","title":"A\/1.8K-S-PB","description":"The ACI Thermistor Strap-On Series features a 1.5 Inch square copper plate with the sensor encapsulated to the back side of the plate to improve the thermal conductivity between the pipe and the sensor when an Immersion style sensor can't be inserted into the pipe. Each sensor has two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI's proven double encapsulation process to eliminate the effects of moisture upon the sensors as well as to improve the thermal response times using our high quality, thermally conductive epoxy. The Strap-On Series sensors can be used to monitor pipe sizes from 1-1\/4 to 10 inch in diameter. For best accuracy and increased thermal conduction between the pipe and the sensor, ACI recommends to clean the pipe before applying thermal grease as well as to insulate the sensor from the effects of the ambient air. Optional weather proof enclosure and NIST certificates are available upon request.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991419044080,"sku":"ACI-A18KSPB","price":40.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a18k-s-pb.png?v=1758690755"},{"product_id":"aci-a1k2wpm10cl2p","title":"A\/1K-2W-PM-10'CL2P","description":"The ACI Platinum Bullet Probe Series features a one-inch stainless steel probe with two or three, 61 cm (24 in), 0.65 mm (22 AWG) Etched Teflon colored lead wires to differentiate the different sensor types. For best results, ACI recommends the use of 1.02 mm (18 AWG) lead wires to reduce the external lead wire resistance when using a Platinum RTD. The sensors in this series are manufactured using ACIs proven double encapsulation process to eliminate the effects of moisture upon the sensors and to increase the response time using our high quality, thermally conductive epoxy. The bullet style sensor is designed to be used to monitor air temperatures and should not be fully submerged in water.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991425597680,"sku":"ACI-A1K2WPM10CL2P","price":81.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a1k-2w-pm-10cl2p.png?v=1758690769"},{"product_id":"aci-a1k2wpm20cl2p","title":"A\/1K-2W-PM-20'CL2P","description":"The ACI Platinum Bullet Probe Series features a one-inch stainless steel probe with two or three, 61 cm (24 in), 0.65 mm (22 AWG) Etched Teflon colored lead wires to differentiate the different sensor types. For best results, ACI recommends the use of 1.02 mm (18 AWG) lead wires to reduce the external lead wire resistance when using a Platinum RTD. The sensors in this series are manufactured using ACIs proven double encapsulation process to eliminate the effects of moisture upon the sensors and to increase the response time using our high quality, thermally conductive epoxy. The bullet style sensor is designed to be used to monitor air temperatures and should not be fully submerged in water.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991425630448,"sku":"ACI-A1K2WPM20CL2P","price":105.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a1k-2w-pm-20cl2p.png?v=1758690763"},{"product_id":"aci-a1k2wpm6cl2p","title":"A\/1K-2W-PM-6'CL2P","description":"The ACI Platinum Bullet Probe Series features a one-inch stainless steel probe with two or three, 61 cm (24 in), 0.65 mm (22 AWG) Etched Teflon colored lead wires to differentiate the different sensor types. For best results, ACI recommends the use of 1.02 mm (18 AWG) lead wires to reduce the external lead wire resistance when using a Platinum RTD. The sensors in this series are manufactured using ACIs proven double encapsulation process to eliminate the effects of moisture upon the sensors and to increase the response time using our high quality, thermally conductive epoxy. The bullet style sensor is designed to be used to monitor air temperatures and should not be fully submerged in water.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991425663216,"sku":"ACI-A1K2WPM6CL2P","price":65.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a1k-2w-pm-6cl2p.png?v=1758690765"},{"product_id":"aci-a1k2ws104x","title":"A\/1K-2W-S10-4X","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991428186352,"sku":"ACI-A1K2WS104X","price":102.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a1k-2w-s10-4x.png?v=1758690783"},{"product_id":"aci-a1k2ws10gd","title":"A\/1K-2W-S10-GD","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991428284656,"sku":"ACI-A1K2WS10GD","price":68.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a1k-2w-s10-gd.png?v=1758690778"},{"product_id":"aci-a1k2ws10gdnist","title":"A\/1K-2W-S10-GD-NIST","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991428350192,"sku":"ACI-A1K2WS10GDNIST","price":133.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/rs_a-1k-2w-s10-gd-nist.png?v=1758690780"},{"product_id":"aci-a1k2ws4x","title":"A\/1K-2W-S-4X","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991428382960,"sku":"ACI-A1K2WS4X","price":83.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a1k-2w-s-4x.png?v=1758690779"},{"product_id":"aci-a1k2wsgd","title":"A\/1K-2W-S-GD","description":"The ACI Platinum Strap-On Series features square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991428448496,"sku":"ACI-A1K2WSGD","price":51.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a1k-2w-s-gd.png?v=1758690761"},{"product_id":"aci-a1k2wsgdnist","title":"A\/1K-2W-S-GD-NIST","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991428481264,"sku":"ACI-A1K2WSGDNIST","price":117.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a1k-2w-s-gd-nist.png?v=1758690759"},{"product_id":"aci-a1k2wspb","title":"A\/1K-2W-S-PB","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991428546800,"sku":"ACI-A1K2WSPB","price":51.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a1k-2w-s-pb.png?v=1758690765"},{"product_id":"aci-a1k3ws10gd","title":"A\/1K-3W-S10-GD","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991437623536,"sku":"ACI-A1K3WS10GD","price":66.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a1k-3w-s10-gd.png?v=1758690781"},{"product_id":"aci-a1k3ws4x","title":"A\/1K-3W-S-4X","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991437656304,"sku":"ACI-A1K3WS4X","price":83.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a1k-3w-s-4x.png?v=1758690778"},{"product_id":"aci-a1k3wsgd","title":"A\/1K-3W-S-GD","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991437721840,"sku":"ACI-A1K3WSGD","price":50.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a1k-3w-s-gd.png?v=1758690788"},{"product_id":"aci-a1k3wspb","title":"A\/1K-3W-S-PB","description":"The ACI Platinum Strap-On Series features a 1.5?Ç¥ square copper plate with the sensor encapsulated to the back side of the copper plate to improve the thermal conductivity between the pipe and sensor. Each sensor has Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire ?Ç£-3W?Ç¥ option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. Sensors in this series are manufactured using ACI?ÇÖs proven double encapsulation process to eliminate the effects of moisture on the sensor as well as to improve thermal response times with our high quality, thermally conductive epoxy. Strap-On sensors can be used to monitor pipe sizes from 1 ???Ç¥ to 10?Ç¥ in diameter. ACI recommends to clean the pipe before applying thermal grease and installing the sensor before finally insulating the sensor from the effects of the ambient air. Optional Weather Proof enclosures and NIST Certificates are available as referenced on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991437787376,"sku":"ACI-A1K3WSPB","price":50.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a1k-3w-s-pb.png?v=1758690783"},{"product_id":"aci-a1knipm10cl2p","title":"A\/1K-NI-PM-10'CL2P","description":"The ACI Thermistor Pipe Mount Series features a 1.1 Inch long Brass probe with a small curvature on the bottom that is designed to increase the surface area and improve the thermal conductivity between the pipe and the sensor. Each sensor has two, 24 inch 22 AWG Etched Teflon colored lead wires to differentiate the many different sensor types. All sensors in this series are manufactured using ACI?ó?é¼?äós proven double encapsulation process to eliminate the effects of moisture upon the sensors and to improve the thermal response times using our high quality, thermally conductive epoxy. The Pipe Mount sensor should be used to monitor pipe or coil sizes from 1\/2?ó?é¼?¥ to 1?ó?é¼?¥ in diameter. A 7.5?ó?é¼?¥ nylon wire tie is supplied for fastening the sensor to the top of the pipe. For best accuracy and increased thermal conduction between the pipe and sensor, ACI recommends to clean the pipe and to apply thermal grease between the sensor and pipe before securely fastening to the pipe and insulating the sensor from any effects of the ambient air. An optional Plenum rated cable, Zip wire or NIST Certificate are available as referenced in the ordering grid on the back of the Product Data Sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991448043760,"sku":"ACI-A1KNIPM10CL2P","price":81.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/rs_a-1k-ni-pm-10cl2p.png?v=1758690803"}],"url":"https:\/\/www.building-controls.com\/collections\/strap-on-pipe.oembed","provider":"Building Controls \u0026 Solutions","version":"1.0","type":"link"}