{"title":"Room","description":"\u003cp\u003eControl, monitor, and get real-time data on your room environments with the collection of room sensors and controls at Building Controls \u0026amp; Solutions.\u003c\/p\u003e","products":[{"product_id":"75f-3xsec44xx","title":"3X-SE-C44X-X","description":"","brand":"75F","offers":[{"title":"Default Title","offer_id":47988872052976,"sku":"75F-3XSEC44XX","price":29.67,"currency_code":"USD","in_stock":true}]},{"product_id":"asi-asirh5r","title":"ASI-RH 5-R","description":"","brand":"ASI","offers":[{"title":"Default Title","offer_id":47991365075184,"sku":"ASI-ASIRH5R","price":203.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/ASI-RH5-R.png?v=1771855587"},{"product_id":"aci-a01anr","title":"A\/0.1AN-R","description":"The ACI High Accuracy Thermistor Room Series combines option flexibility with attractive styling in our R2 or R style enclosures which both include Four-way air flow design to minimize the amount of self-heating to the sensor. Enclosures are offered in a White “-R2” or Beige “-R” color and are designed to be mounted over a single gang junction box or hole in the wall with the use of drywall anchors. Screw terminal blocks are available for making all connections to the temperature sensor, Set Point, After Hours Override, and Communication Jacks for easy access to your building management system (network). An optional 3.175mm","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991384310000,"sku":"ACI-A01ANR","price":31.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a01an-r.png?v=1758690708"},{"product_id":"aci-a01anr2","title":"A\/0.1AN-R2","description":"The ACI High Accuracy Thermistor Room Series combines option flexibility with attractive styling in our R2 or R style enclosures which both include Four-way air flow design to minimize the amount of self-heating to the sensor. Enclosures are offered in a White “-R2” or Beige “-R” color and are designed to be mounted over a single gang junction box or hole in the wall with the use of drywall anchors. Screw terminal blocks are available for making all connections to the temperature sensor, Set Point, After Hours Override, and Communication Jacks for easy access to your building management system (network). An optional 3.175mm","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991384342768,"sku":"ACI-A01ANR2","price":30.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a01an-r2.png?v=1758690704"},{"product_id":"aci-a01cpr","title":"A\/0.1CP-R","description":"The ACI High Accuracy Thermistor Room Series combines option flexibility with attractive styling in our “-R2” or “-R” style enclosures which both include Four-way air flow design to minimize the amount of self-heating to the sensor. Enclosures are offered in a White “-R2” or Beige “-R” color and are designed to be mounted over a single gang junction box or hole in the wall with the use of drywall anchors. Screw terminal blocks are available for making all connections to the temperature sensor, Set Point, “After Hours” Override, and Communication Jacks for easy access to your building management system (network). An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive are available to insulate the sensor from thermal drafts from within the wall or wall surface. The enclosure covers are secured using a 1\/16 in Hex driver to secure the cover from being easily removed. An optional company logo is available for an additional charge and must be ordered as a separate line item underneath the Thermistor Room Series model number.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991385817328,"sku":"ACI-A01CPR","price":30.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a01cp-r.png?v=1758690713"},{"product_id":"aci-a01cpr2","title":"A\/0.1CP-R2","description":"The ACI High Accuracy Thermistor Room Series combines option flexibility with attractive styling in our “-R2” or “-R” style enclosures which both include Four-way air flow design to minimize the amount of self-heating to the sensor. Enclosures are offered in a White “-R2” or Beige “-R” color and are designed to be mounted over a single gang junction box or hole in the wall with the use of drywall anchors. Screw terminal blocks are available for making all connections to the temperature sensor, Set Point, “After Hours” Override, and Communication Jacks for easy access to your building management system (network). An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive are available to insulate the sensor from thermal drafts from within the wall or wall surface. The enclosure covers are secured using a 1\/16 in Hex driver to secure the cover from being easily removed. An optional company logo is available for an additional charge and must be ordered as a separate line item underneath the Thermistor Room Series model number.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991385850096,"sku":"ACI-A01CPR2","price":31.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a01cp-r2.png?v=1758690708"},{"product_id":"aci-a1002wbbs","title":"A\/100-2W-BBS","description":"The ACI Platinum Flush Mount Button Series features a stainless steel, brass or white plastic button sensor with Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire 3W option should be ordered when using a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for external lead wire resistance that will affect your sensor output. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD. Sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture on the sensor and to increase response time using our high quality, thermally conductive epoxy. This sensor uses a small, low profile design and should be used in applications where aesthetics is one of your primary concerns. Each unit is supplied with a mounting kit to aid in the installation process so that they can be easily hidden or blended into the environment or space. Note that if painting the sensors, be sure to coat with as little paint as possible, to limit the effect on accuracy and responsiveness of the sensor. This series can be ordered with optional NIST Certificates as referenced in the product ordering grid.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991385948400,"sku":"ACI-A1002WBBS","price":85.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-2w-bbs.png?v=1758690709"},{"product_id":"aci-a1002wpbs","title":"A\/100-2W-PBS","description":"The ACI Platinum Flush Mount Button Series features a stainless steel, brass or white plastic button sensor with Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire 3W option should be ordered when using a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for external lead wire resistance that will affect your sensor output. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD. Sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture on the sensor and to increase response time using our high quality, thermally conductive epoxy. This sensor uses a small, low profile design and should be used in applications where aesthetics is one of your primary concerns. Each unit is supplied with a mounting kit to aid in the installation process so that they can be easily hidden or blended into the environment or space. Note that if painting the sensors, be sure to coat with as little paint as possible, to limit the effect on accuracy and responsiveness of the sensor. This series can be ordered with optional NIST Certificates as referenced in the product ordering grid.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991388438768,"sku":"ACI-A1002WPBS","price":50.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-2w-pbs.png?v=1758690722"},{"product_id":"aci-a1002wr","title":"A\/100-2W-R","description":"The ACI Platinum Room Series combines flexibility with attractive styling in our R2 or R style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White R2 or Beige R color depending on enclosure style and designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. An optional LCD Display is available in the Beige “-R” style enclosure. Screw terminal blocks are provided for making connections to your building management system. An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface temperature. A 1\/16 in Hex driver can be used to secure the cover from being easily removed. The LCD option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991388700912,"sku":"ACI-A1002WR","price":41.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-2w-r.png?v=1758690721"},{"product_id":"aci-a1002wr2","title":"A\/100-2W-R2","description":"The ACI Platinum Room Series combines flexibility with attractive styling in our R2 or R style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White R2 or Beige R color depending on enclosure style and designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. An optional LCD Display is available in the Beige “-R” style enclosure. Screw terminal blocks are provided for making connections to your building management system. An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface temperature. A 1\/16 in Hex driver can be used to secure the cover from being easily removed. The LCD option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991388733680,"sku":"ACI-A1002WR2","price":41.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-2w-r2.png?v=1758690718"},{"product_id":"aci-a1002wrexpl","title":"A\/100-2W-R-EXPL","description":"The ACI Hazardous Platinum RTD Series features a 1\/2\" NPT Process threaded fitting and 1\/4\" diameter stainless steel probe with 22 AWG Etched Teflon colored lead wires. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture upon the sensors and to increase response times using our high quality, thermally conductive epoxy. The Hazardous sensors come standard with a heavy duty Feraloy® Iron or Aluminum Connection Head depending on the configuration ordered. These sensors can be used in Wall Mounted (Room), Duct, and Immersion style configurations and include an O-Ring Seal, Ground Screw, and weather resistant finish. The “INW” Immersion sensor without thermowell can be used with an existing thermowell or paired with any of the Machined thermowells (See Accessories) when higher flow rates, temperatures, pressure rating or corrosion resistance is required. NIST Certificates are also available as shown on the back of the product data sheet. This product should be installed by a trained professional with knowledge of local codes and regulations.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991388766448,"sku":"ACI-A1002WREXPL","price":532.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-2w-r-expl.png?v=1758690715"},{"product_id":"aci-a1002wro","title":"A\/100-2W-RO","description":"\u003cp\u003eThe ACI Platinum Room Series combines flexibility with attractive styling in our R2 or R style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White R2 or Beige R color depending on enclosure style and designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. An optional LCD Display is available in the Beige “-R” style enclosure. Screw terminal blocks are provided for making connections to your building management system. An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface temperature. A 1\/16 in Hex driver can be used to secure the cover from being easily removed. The LCD option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.\u003c\/p\u003e","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991388799216,"sku":"ACI-A1002WRO","price":55.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-2w-ro.jpg?v=1758690719"},{"product_id":"aci-a1002wrrj4","title":"A\/100-2W-R-RJ4","description":"The ACI Platinum Room Series combines flexibility with attractive styling in our R2 or R style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White R2 or Beige R color depending on enclosure style and designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. An optional LCD Display is available in the Beige “-R” style enclosure. Screw terminal blocks are provided for making connections to your building management system. An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface temperature. A 1\/16 in Hex driver can be used to secure the cover from being easily removed. The LCD option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991388831984,"sku":"ACI-A1002WRRJ4","price":60.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-2w-r-rj4.png?v=1758690720"},{"product_id":"aci-a1002wrrj6","title":"A\/100-2W-R-RJ6","description":"The ACI Platinum Room Series combines flexibility with attractive styling in our R2 or R style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White R2 or Beige R color depending on enclosure style and designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. An optional LCD Display is available in the Beige “-R” style enclosure. Screw terminal blocks are provided for making connections to your building management system. An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface temperature. A 1\/16 in Hex driver can be used to secure the cover from being easily removed. The LCD option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991388864752,"sku":"ACI-A1002WRRJ6","price":60.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-2w-r-rj6.png?v=1758690722"},{"product_id":"aci-a1002wrsa03c5","title":"A\/100-2W-RS-A03-C5","description":"\u003cp\u003eThe ACI Platinum Room Series combines flexibility with attractive styling in our R2 or R style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White R2 or Beige R color depending on enclosure style and designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. An optional LCD Display is available in the Beige “-R” style enclosure. Screw terminal blocks are provided for making connections to your building management system. An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface temperature. A 1\/16 in Hex driver can be used to secure the cover from being easily removed. The LCD option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.\u003c\/p\u003e","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991388897520,"sku":"ACI-A1002WRSA03C5","price":55.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-2w-rs-a03-c5.jpg?v=1758690719"},{"product_id":"aci-a1002wrsa27d6","title":"A\/100-2W-RS-A27-D6","description":"The ACI Platinum Room Series combines flexibility with attractive styling in our R2 or R style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White R2 or Beige R color depending on enclosure style and designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. An optional LCD Display is available in the Beige “-R” style enclosure. Screw terminal blocks are provided for making connections to your building management system. An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface temperature. A 1\/16 in Hex driver can be used to secure the cover from being easily removed. The LCD option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991388930288,"sku":"ACI-A1002WRSA27D6","price":55.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-2w-rs-a27-d6.png?v=1758690721"},{"product_id":"aci-a1002wrsoa12c5","title":"A\/100-2W-RSO-A12-C5","description":"\u003cp\u003eThe ACI Platinum Room Series combines flexibility with attractive styling in our R2 or R style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White R2 or Beige R color depending on enclosure style and designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. An optional LCD Display is available in the Beige “-R” style enclosure. Screw terminal blocks are provided for making connections to your building management system. An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface temperature. A 1\/16 in Hex driver can be used to secure the cover from being easily removed. The LCD option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.\u003c\/p\u003e","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991388963056,"sku":"ACI-A1002WRSOA12C5","price":71.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-2w-rso-a12-c5.jpg?v=1758690729"},{"product_id":"aci-a1002wsbs","title":"A\/100-2W-SBS","description":"The ACI Platinum Flush Mount Button Series features a stainless steel, brass or white plastic button sensor with Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire 3W option should be ordered when using a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for external lead wire resistance that will affect your sensor output. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD. Sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture on the sensor and to increase response time using our high quality, thermally conductive epoxy. This sensor uses a small, low profile design and should be used in applications where aesthetics is one of your primary concerns. Each unit is supplied with a mounting kit to aid in the installation process so that they can be easily hidden or blended into the environment or space. Note that if painting the sensors, be sure to coat with as little paint as possible, to limit the effect on accuracy and responsiveness of the sensor. This series can be ordered with optional NIST Certificates as referenced in the product ordering grid.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991389061360,"sku":"ACI-A1002WSBS","price":85.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-2w-sbs.png?v=1758690721"},{"product_id":"aci-a1002wsp","title":"A\/100-2W-SP","description":"The ACI Platinum Wall Plate Series features a decorative Stainless Steel or Aluminum wall plate with two or three Teflon colored lead wires to differentiate between the different sensor types. All three-wire 3W sensors should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for external lead wire resistance that will affect the accuracy of your sensor. ACI recommends the use of 18 AWG lead wires to reduce the effect of external lead wire resistance when using a Platinum RTD. The sensors in this series are manufactured using ACI’s double encapsulation process to eliminate the effects of moisture upon the sensors and to increase the thermal response using our high quality, thermally conductive epoxy. A foam pad is included to insulate the sensor from thermal drafts within the wall. All wall plates are will provide a level of security and protection to the sensor when mounted over a single gang junction box or hole in the wall with the use of drywall anchors. Tamper Proof mounting screws, screw driver bits and NIST Certificates are available as referenced on the back of the data sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991389159664,"sku":"ACI-A1002WSP","price":49.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-2w-sp.png?v=1758690722"},{"product_id":"aci-a1003wbbs","title":"A\/100-3W-BBS","description":"The ACI Platinum Flush Mount Button Series features a stainless steel, brass or white plastic button sensor with Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire 3W option should be ordered when using a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for external lead wire resistance that will affect your sensor output. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD. Sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture on the sensor and to increase response time using our high quality, thermally conductive epoxy. This sensor uses a small, low profile design and should be used in applications where aesthetics is one of your primary concerns. Each unit is supplied with a mounting kit to aid in the installation process so that they can be easily hidden or blended into the environment or space. Note that if painting the sensors, be sure to coat with as little paint as possible, to limit the effect on accuracy and responsiveness of the sensor. This series can be ordered with optional NIST Certificates as referenced in the product ordering grid.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991389225200,"sku":"ACI-A1003WBBS","price":85.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-3w-bbs.png?v=1758690729"},{"product_id":"aci-a1003wpbs","title":"A\/100-3W-PBS","description":"The ACI Platinum Flush Mount Button Series features a stainless steel, brass or white plastic button sensor with Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire 3W option should be ordered when using a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for external lead wire resistance that will affect your sensor output. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD. Sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture on the sensor and to increase response time using our high quality, thermally conductive epoxy. This sensor uses a small, low profile design and should be used in applications where aesthetics is one of your primary concerns. Each unit is supplied with a mounting kit to aid in the installation process so that they can be easily hidden or blended into the environment or space. Note that if painting the sensors, be sure to coat with as little paint as possible, to limit the effect on accuracy and responsiveness of the sensor. This series can be ordered with optional NIST Certificates as referenced in the product ordering grid.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991392829680,"sku":"ACI-A1003WPBS","price":50.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-3w-pbs.png?v=1758690733"},{"product_id":"aci-a1003wr","title":"A\/100-3W-R","description":"The ACI Platinum Room Series combines flexibility with attractive styling in our R2 or R style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White R2 or Beige R color depending on enclosure style and designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. An optional LCD Display is available in the Beige “-R” style enclosure. Screw terminal blocks are provided for making connections to your building management system. An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface temperature. A 1\/16 in Hex driver can be used to secure the cover from being easily removed. The LCD option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991393419504,"sku":"ACI-A1003WR","price":41.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-3w-r.png?v=1758690732"},{"product_id":"aci-a1003wr2","title":"A\/100-3W-R2","description":"The ACI Platinum Room Series combines flexibility with attractive styling in our R2 or R style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White R2 or Beige R color depending on enclosure style and designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. An optional LCD Display is available in the Beige “-R” style enclosure. Screw terminal blocks are provided for making connections to your building management system. An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface temperature. A 1\/16 in Hex driver can be used to secure the cover from being easily removed. The LCD option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991393452272,"sku":"ACI-A1003WR2","price":41.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-3w-r2.png?v=1758690733"},{"product_id":"aci-a1003wr2nist","title":"A\/100-3W-R2-NIST","description":"The ACI Platinum Room Series combines flexibility with attractive styling in our R2 or R style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White R2 or Beige R color depending on enclosure style and designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. An optional LCD Display is available in the Beige “-R” style enclosure. Screw terminal blocks are provided for making connections to your building management system. An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface temperature. A 1\/16 in Hex driver can be used to secure the cover from being easily removed. The LCD option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991393485040,"sku":"ACI-A1003WR2NIST","price":106.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-3w-r2-nist.png?v=1758690736"},{"product_id":"aci-a1003wr2sa12c6","title":"A\/100-3W-R2S-A12-C6","description":"\u003cp\u003eThe ACI Platinum Room Series combines flexibility with attractive styling in our R2 or R style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White R2 or Beige R color depending on enclosure style and designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. An optional LCD Display is available in the Beige “-R” style enclosure. Screw terminal blocks are provided for making connections to your building management system. An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface temperature. A 1\/16 in Hex driver can be used to secure the cover from being easily removed. The LCD option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.\u003c\/p\u003e","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991393517808,"sku":"ACI-A1003WR2SA12C6","price":55.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-3w-r2s-a12-c6.jpg?v=1758690737"},{"product_id":"aci-a1003wrexpl","title":"A\/100-3W-R-EXPL","description":"The ACI Hazardous Platinum RTD Series features a 1\/2\" NPT Process threaded fitting and 1\/4\" diameter stainless steel probe with 22 AWG Etched Teflon colored lead wires. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture upon the sensors and to increase response times using our high quality, thermally conductive epoxy. The Hazardous sensors come standard with a heavy duty Feraloy® Iron or Aluminum Connection Head depending on the configuration ordered. These sensors can be used in Wall Mounted (Room), Duct, and Immersion style configurations and include an O-Ring Seal, Ground Screw, and weather resistant finish. The “INW” Immersion sensor without thermowell can be used with an existing thermowell or paired with any of the Machined thermowells (See Accessories) when higher flow rates, temperatures, pressure rating or corrosion resistance is required. NIST Certificates are also available as shown on the back of the product data sheet. This product should be installed by a trained professional with knowledge of local codes and regulations.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991393550576,"sku":"ACI-A1003WREXPL","price":532.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-3w-r-expl.png?v=1758690738"},{"product_id":"aci-a1003wro","title":"A\/100-3W-RO","description":"The ACI Platinum Room Series combines flexibility with attractive styling in our R2 or R style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White R2 or Beige R color depending on enclosure style and designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. An optional LCD Display is available in the Beige “-R” style enclosure. Screw terminal blocks are provided for making connections to your building management system. An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface temperature. A 1\/16 in Hex driver can be used to secure the cover from being easily removed. The LCD option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991393583344,"sku":"ACI-A1003WRO","price":55.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-3w-ro.png?v=1758690741"},{"product_id":"aci-a1003wsgd","title":"A\/100-3W-S-GD","description":"The ACI Platinum Flush Mount Button Series features a stainless steel, brass or white plastic button sensor with Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire 3W option should be ordered when using a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for external lead wire resistance that will affect your sensor output. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD. Sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture on the sensor and to increase response time using our high quality, thermally conductive epoxy. This sensor uses a small, low profile design and should be used in applications where aesthetics is one of your primary concerns. Each unit is supplied with a mounting kit to aid in the installation process so that they can be easily hidden or blended into the environment or space. Note that if painting the sensors, be sure to coat with as little paint as possible, to limit the effect on accuracy and responsiveness of the sensor. This series can be ordered with optional NIST Certificates as referenced in the product ordering grid.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991393747184,"sku":"ACI-A1003WSGD","price":50.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-3w-sbs.png?v=1758690736"},{"product_id":"aci-a1003wspb","title":"A\/100-3W-S-PB","description":"The ACI Platinum Wall Plate Series features a decorative Stainless Steel or Aluminum wall plate with two or three Teflon colored lead wires to differentiate between the different sensor types. All three-wire 3W sensors should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for external lead wire resistance that will affect the accuracy of your sensor. ACI recommends the use of 18 AWG lead wires to reduce the effect of external lead wire resistance when using a Platinum RTD. The sensors in this series are manufactured using ACI’s double encapsulation process to eliminate the effects of moisture upon the sensors and to increase the thermal response using our high quality, thermally conductive epoxy. A foam pad is included to insulate the sensor from thermal drafts within the wall. All wall plates are will provide a level of security and protection to the sensor when mounted over a single gang junction box or hole in the wall with the use of drywall anchors. Tamper Proof mounting screws, screw driver bits and NIST Certificates are available as referenced on the back of the data sheet.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991393845488,"sku":"ACI-A1003WSPB","price":50.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100-3w-sp.png?v=1758690739"},{"product_id":"aci-a100ksbbs","title":"A\/100KS-BBS","description":"The ACI Thermistor Wall Plate Series features a decorative, single gang brushed Stainless Steel or Smooth Satin Finished Anodized Aluminum wall plate with two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different NTC sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture upon the sensors and to increase the thermal response times using our high quality, thermally conductive epoxy. A foam pad is included to insulate the sensor from thermal drafts within the wall, since they are designed to be mounted over a standard single gang junction box or directly over a hole in the wall with the use of drywall anchors to monitor ambient air temperatures in a space. Tamper Proof mounting screws are available upon request.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991394205936,"sku":"ACI-A100KSBBS","price":86.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100ks-ap.png?v=1758690739"},{"product_id":"aci-a100ksbp","title":"A\/100KS-BP","description":"The ACI Thermistor Flush Mount Button Sensors Series features a stainless steel, brass or white plastic button sensor with (2) 24 Inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI’s proven encapsulation process to eliminate the effects of moisture upon the sensors and to increase the response times using our high quality, thermally conductive epoxy. This sensor uses a small, low profile design, and should be used in applications where aesthetics is your primary concern. Each unit is supplied with a mounting kit such that they can be hidden underneath cabinets or shelving units, in decorative metal plates, trim, drywall or from a 1\/2\" piece of conduit coming down from the ceiling or roof. Note that if painting the sensors, be sure to coat with as little paint as possible to not affect the accuracy or responsiveness of the sensor.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991394238704,"sku":"ACI-A100KSBP","price":20.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100ks-bbs.png?v=1758690737"},{"product_id":"aci-a100kspbs","title":"A\/100KS-PBS","description":"The ACI Thermistor Flush Mount Button Sensors Series features a stainless steel, brass or white plastic button sensor with (2) 24 Inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI’s proven encapsulation process to eliminate the effects of moisture upon the sensors and to increase the response times using our high quality, thermally conductive epoxy. This sensor uses a small, low profile design, and should be used in applications where aesthetics is your primary concern. Each unit is supplied with a mounting kit such that they can be hidden underneath cabinets or shelving units, in decorative metal plates, trim, drywall or from a 1\/2\" piece of conduit coming down from the ceiling or roof. Note that if painting the sensors, be sure to coat with as little paint as possible to not affect the accuracy or responsiveness of the sensor.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991396401392,"sku":"ACI-A100KSPBS","price":51.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100ks-pbs.png?v=1758690720"},{"product_id":"aci-a100ksr","title":"A\/100KS-R","description":"The ACI Thermistor Room Series combines option flexibility with attractive styling in our “-R2” or “-R” style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White “-R2” or Beige “-R” color depending on the enclosure style. These units are designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. Screw terminal blocks are available for making all connections to your building management system (network). An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface. A 1\/16 in Hex driver is needed to secure the cover from being easily removed. The “LCD” option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991396565232,"sku":"ACI-A100KSR","price":23.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100ks-r.png?v=1758690724"},{"product_id":"aci-a100ksr2","title":"A\/100KS-R2","description":"The ACI Thermistor Room Series combines option flexibility with attractive styling in our “-R2” or “-R” style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White “-R2” or Beige “-R” color depending on the enclosure style. These units are designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. Screw terminal blocks are available for making all connections to your building management system (network). An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface. A 1\/16 in Hex driver is needed to secure the cover from being easily removed. The “LCD” option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991396598000,"sku":"ACI-A100KSR2","price":23.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100ks-r2.png?v=1758690720"},{"product_id":"aci-a100ksrexpl","title":"A\/100KS-R-EXPL","description":"The ACI Hazardous Thermistor Series features a 1\/2\" NPT Process threaded fitting and 1\/4\" diameter stainless steel probe with two, 22 AWG Etched Teflon colored lead wires to differentiate the different NTC sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture upon the sensors and to increase response times using our high quality, thermally conductive epoxy. The Hazardous sensors come standard with a heavy duty Feraloy® Iron or Aluminum Connection Head depending on the configuration ordered. These sensors can be used in Wall Mounted (Room), Duct, and Immersion style configurations and include an O-Ring Seal, Green Ground Screw, and weather resistant finish. The “INW” Immersion sensor without thermowell can be used with an existing thermowell or paired with any of the Machined thermowells (See Accessories) when higher ow rates, temperatures, pressure rating or corrosion resistance is required. NIST Certificates are available as shown in the ordering grid on the back of the product data sheet. This product should be installed by a trained professional with knowledge of local codes and regulations.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991396729072,"sku":"ACI-A100KSREXPL","price":519.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100ks-r-expl.png?v=1758690725"},{"product_id":"aci-a100ksrlcdf","title":"A\/100KS-R-LCD-F","description":"\u003cp\u003eThe ACI Thermistor Room Series combines option flexibility with attractive styling in our “-R2” or “-R” style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White “-R2” or Beige “-R” color depending on the enclosure style. These units are designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. Screw terminal blocks are available for making all connections to your building management system (network). An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface. A 1\/16 in Hex driver is needed to secure the cover from being easily removed. The “LCD” option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.\u003c\/p\u003e","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991396761840,"sku":"ACI-A100KSRLCDF","price":125.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100ks-r-lcd-f.jpg?v=1758690726"},{"product_id":"aci-a100kssbs","title":"A\/100KS-SBS","description":"The ACI Thermistor Flush Mount Button Sensors Series features a stainless steel, brass or white plastic button sensor with (2) 24 Inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI’s proven encapsulation process to eliminate the effects of moisture upon the sensors and to increase the response times using our high quality, thermally conductive epoxy. This sensor uses a small, low profile design, and should be used in applications where aesthetics is your primary concern. Each unit is supplied with a mounting kit such that they can be hidden underneath cabinets or shelving units, in decorative metal plates, trim, drywall or from a 1\/2\" piece of conduit coming down from the ceiling or roof. Note that if painting the sensors, be sure to coat with as little paint as possible to not affect the accuracy or responsiveness of the sensor.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991396827376,"sku":"ACI-A100KSSBS","price":86.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100ks-sbs.png?v=1758690727"},{"product_id":"aci-a100kssp","title":"A\/100KS-SP","description":"The ACI Thermistor Wall Plate Series features a decorative, single gang brushed Stainless Steel or Smooth Satin Finished Anodized Aluminum wall plate with two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different NTC sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture upon the sensors and to increase the thermal response times using our high quality, thermally conductive epoxy. A foam pad is included to insulate the sensor from thermal drafts within the wall, since they are designed to be mounted over a standard single gang junction box or directly over a hole in the wall with the use of drywall anchors to monitor ambient air temperatures in a space. Tamper Proof mounting screws are available upon request.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991396892912,"sku":"ACI-A100KSSP","price":24.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a100ks-sp.png?v=1758690725"},{"product_id":"aci-a10ke1ap","title":"A\/10K-E1-AP","description":"The ACI Thermistor Wall Plate Series features a decorative, single gang brushed Stainless Steel or Smooth Satin Finished Anodized Aluminum wall plate with two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different NTC sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture upon the sensors and to increase the thermal response times using our high quality, thermally conductive epoxy. A foam pad is included to insulate the sensor from thermal drafts within the wall, since they are designed to be mounted over a standard single gang junction box or directly over a hole in the wall with the use of drywall anchors to monitor ambient air temperatures in a space. Tamper Proof mounting screws are available upon request.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991397777648,"sku":"ACI-A10KE1AP","price":28.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a10k-e1-ap.png?v=1758690737"},{"product_id":"aci-a10ke1bbs","title":"A\/10K-E1-BBS","description":"The ACI Thermistor Flush Mount Button Sensors Series features a stainless steel, brass or white plastic button sensor with (2) 24 Inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI’s proven encapsulation process to eliminate the effects of moisture upon the sensors and to increase the response times using our high quality, thermally conductive epoxy. This sensor uses a small, low profile design, and should be used in applications where aesthetics is your primary concern. Each unit is supplied with a mounting kit such that they can be hidden underneath cabinets or shelving units, in decorative metal plates, trim, drywall or from a 1\/2\" piece of conduit coming down from the ceiling or roof. Note that if painting the sensors, be sure to coat with as little paint as possible to not affect the accuracy or responsiveness of the sensor.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991397810416,"sku":"ACI-A10KE1BBS","price":86.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a10k-e1-bbs.png?v=1758690729"},{"product_id":"aci-a10ke1pbs","title":"A\/10K-E1-PBS","description":"The ACI Thermistor Flush Mount Button Sensors Series features a stainless steel, brass or white plastic button sensor with (2) 24 Inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI’s proven encapsulation process to eliminate the effects of moisture upon the sensors and to increase the response times using our high quality, thermally conductive epoxy. This sensor uses a small, low profile design, and should be used in applications where aesthetics is your primary concern. Each unit is supplied with a mounting kit such that they can be hidden underneath cabinets or shelving units, in decorative metal plates, trim, drywall or from a 1\/2\" piece of conduit coming down from the ceiling or roof. Note that if painting the sensors, be sure to coat with as little paint as possible to not affect the accuracy or responsiveness of the sensor.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991399678192,"sku":"ACI-A10KE1PBS","price":53.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a10k-e1-pbs.png?v=1758690729"},{"product_id":"aci-a10ke1r","title":"A\/10K-E1-R","description":"The ACI Thermistor Room Series combines option flexibility with attractive styling in our “-R2” or “-R” style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White “-R2” or Beige “-R” color depending on the enclosure style. These units are designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. Screw terminal blocks are available for making all connections to your building management system (network). An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface. A 1\/16 in Hex driver is needed to secure the cover from being easily removed. The “LCD” option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991400038640,"sku":"ACI-A10KE1R","price":22.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a10k-e1-r.png?v=1758690728"},{"product_id":"aci-a10ke1r2","title":"A\/10K-E1-R2","description":"The ACI Thermistor Room Series combines option flexibility with attractive styling in our “-R2” or “-R” style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White “-R2” or Beige “-R” color depending on the enclosure style. These units are designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. Screw terminal blocks are available for making all connections to your building management system (network). An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface. A 1\/16 in Hex driver is needed to secure the cover from being easily removed. The “LCD” option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991400071408,"sku":"ACI-A10KE1R2","price":25.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a10k-e1-r2.png?v=1758690725"},{"product_id":"aci-a10ke1rexpl","title":"A\/10K-E1-R-EXPL","description":"The ACI Hazardous Thermistor Series features a 1\/2 Inch NPT Process threaded fitting and 1\/4 inch diameter stainless steel probe with two, 22 AWG Etched Teflon colored lead wires to differentiate the different NTC sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the eects of moisture upon the sensors and to increase response times using our high quality, thermally conductive epoxy. The Hazardous sensors come standard with a heavy duty Feraloy® Iron or Aluminum Connection Head depending on the configuration ordered. These sensors can be used in Wall Mounted (Room), Duct, and Immersion style configurations and include an O-Ring Seal, Green Ground Screw, and weather resistant nish. The “INW” Immersion sensor without thermowell can be used with an existing thermowell or paired with any of the Machined thermowells (See Accessories) when higher ow rates, temperatures, pressure rating or corrosion resistance is required. NIST Certificates are available as shown in the ordering grid on the back of the product data sheet. This product should be installed by a trained professional with knowledge of local codes and regulations.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991400366320,"sku":"ACI-A10KE1REXPL","price":598.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a10k-e1-r-expl.png?v=1758690736"},{"product_id":"aci-a10ke1ro","title":"A\/10K-E1-RO","description":"\u003cp\u003eThe ACI Thermistor Room Series combines option flexibility with attractive styling in our “-R2” or “-R” style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White “-R2” or Beige “-R” color depending on the enclosure style. These units are designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. Screw terminal blocks are available for making all connections to your building management system (network). An optional 3.175 mm (1\/8 in) Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface. A 1\/16 in Hex driver is needed to secure the cover from being easily removed. The “LCD” option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.\u003c\/p\u003e","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991400399088,"sku":"ACI-A10KE1RO","price":38.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a10k-e1-ro.jpg?v=1758690729"},{"product_id":"aci-a10ke1rsa03c5","title":"A\/10K-E1-RS-A03-C5","description":"The ACI Thermistor Room Series combines option flexibility with attractive styling in our “-R2” or “-R” style enclosures which include four-way air flow design to minimize self-heating to the sensor. These enclosures are offered in a White “-R2” or Beige “-R” color depending on the enclosure style. These units are designed to be mounted over a single gang junction box or hole in the wall using drywall anchors. Screw terminal blocks are available for making all connections to your building management system [network]. An optional 3.175 mm [1\/8 in] Black foam pad with pressure sensitive adhesive is available to insulate the sensor from thermal drafts within the wall or wall surface. A 1\/16 in Hex driver is needed to secure the cover from being easily removed. The “LCD” option uses two temperature sensors to monitor the ambient air temperature in the space and is factory calibrated at a single point.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991400431856,"sku":"ACI-A10KE1RSA03C5","price":38.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a-10k-e1-rs-a03-c5.jpg?v=1758690728"},{"product_id":"aci-a10ke1sbs","title":"A\/10K-E1-SBS","description":"The ACI Thermistor Flush Mount Button Sensors Series features a stainless steel, brass or white plastic button sensor with (2) 24 Inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI’s proven encapsulation process to eliminate the effects of moisture upon the sensors and to increase the response times using our high quality, thermally conductive epoxy. This sensor uses a small, low profile design, and should be used in applications where aesthetics is your primary concern. Each unit is supplied with a mounting kit such that they can be hidden underneath cabinets or shelving units, in decorative metal plates, trim, drywall or from a 1\/2\" piece of conduit coming down from the ceiling or roof. Note that if painting the sensors, be sure to coat with as little paint as possible to not affect the accuracy or responsiveness of the sensor.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991400497392,"sku":"ACI-A10KE1SBS","price":88.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a10k-e1-sbs.png?v=1758690728"},{"product_id":"aci-a10ke1sp","title":"A\/10K-E1-SP","description":"The ACI Thermistor Wall Plate Series features a decorative, single gang brushed Stainless Steel or Smooth Satin Finished Anodized Aluminum wall plate with two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different NTC sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture upon the sensors and to increase the thermal response times using our high quality, thermally conductive epoxy. A foam pad is included to insulate the sensor from thermal drafts within the wall, since they are designed to be mounted over a standard single gang junction box or directly over a hole in the wall with the use of drywall anchors to monitor ambient air temperatures in a space. Tamper Proof mounting screws are available upon request.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991400562928,"sku":"ACI-A10KE1SP","price":25.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a10k-e1-sp.png?v=1758690731"},{"product_id":"aci-a10ksap","title":"A\/10KS-AP","description":"The ACI Thermistor Wall Plate Series features a decorative, single gang brushed Stainless Steel or Smooth Satin Finished Anodized Aluminum wall plate with two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different NTC sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture upon the sensors and to increase the thermal response times using our high quality, thermally conductive epoxy. A foam pad is included to insulate the sensor from thermal drafts within the wall, since they are designed to be mounted over a standard single gang junction box or directly over a hole in the wall with the use of drywall anchors to monitor ambient air temperatures in a space. Tamper Proof mounting screws are available upon request.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991401152752,"sku":"ACI-A10KSAP","price":28.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a10ks-ap.png?v=1758690741"},{"product_id":"aci-a10ksbbs","title":"A\/10KS-BBS","description":"The ACI Thermistor Flush Mount Button Sensors Series features a stainless steel, brass or white plastic button sensor with (2) 24 Inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI’s proven encapsulation process to eliminate the effects of moisture upon the sensors and to increase the response times using our high quality, thermally conductive epoxy. This sensor uses a small, low profile design, and should be used in applications where aesthetics is your primary concern. Each unit is supplied with a mounting kit such that they can be hidden underneath cabinets or shelving units, in decorative metal plates, trim, drywall or from a 1\/2\" piece of conduit coming down from the ceiling or roof. Note that if painting the sensors, be sure to coat with as little paint as possible to not affect the accuracy or responsiveness of the sensor.","brand":"ACI","offers":[{"title":"Default Title","offer_id":47991401185520,"sku":"ACI-A10KSBBS","price":86.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/5118\/9744\/files\/aci-a10ks-bbs.png?v=1758690735"}],"url":"https:\/\/www.building-controls.com\/collections\/room.oembed","provider":"Building Controls \u0026 Solutions","version":"1.0","type":"link"}